HDU 0

SIMPLE = T / Standard FITS format (NOST-100.0)

BITPIX = 16 / # of bits storing pix values

NAXIS = 0 / # of axes in frame

EXTEND = T / Extension may be present

ORIGIN = 'ESO-PARANAL' / European Southern Observatory

DATE = '2011-10-04T00:50:23.357' / UT date when this file was written

TELESCOP= 'VST ' / ESO Telescope Name

INSTRUME= 'OMEGACAM' / Instrument used.

OBJECT = 'ATLAS survey' / Original target.

RA = 332.671973 / 22:10:41.2 RA (J2000) pointing (deg)

DEC = -25.60722 / -25:36:25.9 DEC (J2000) pointing (deg)

EQUINOX = 2000. / Standard FK5 (years)

RADECSYS= 'FK5 ' / Coordinate reference frame

EXPTIME = 45.0000 / Total integration time

MJD-OBS = 55838.034444051 / MJD start (2011-10-04T00:49:35.966)

DATE-OBS= '2011-10-04T00:49:35.966' / Date of observation

UTC = 2964.000 / 00:49:24.000 UTC at start (sec)

LST = 75437.163 / 20:57:17.163 LST at start (sec)

PI-COI = 'UNKNOWN ' / PI-COI name.

OBSERVER= 'UNKNOWN ' / Name of observer.

HIERARCH ESO ADA ABSROT END = 89.25725 / Abs rot angle at exp end (deg)

HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position

HIERARCH ESO ADA ABSROT START= 89.16179 / Abs rot angle at exp start (deg)

HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider

HIERARCH ESO ADA POSANG = 0.00000 / Position angle at start

HIERARCH ESO DET BITS = 16 / Bits per pixel readout

HIERARCH ESO DET CHIPS = 32 / # of chips in detector array

HIERARCH ESO DET DATE = '2004-11-10' / Installation date

HIERARCH ESO DET DEC = 0.000000000 / Apparent 00:00:00.0 DEC at start

HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction

HIERARCH ESO DET EXP NO = 521 / Unique exposure ID number

HIERARCH ESO DET EXP RDTTIME = 30.589 / image readout time

HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type

HIERARCH ESO DET EXP XFERTIM = 30.555 / image transfer time

HIERARCH ESO DET FRAM ID = 1 / Image sequencial number

HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type

HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.114' / Detector system Id

HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system

HIERARCH ESO DET OUTPUTS = 32 / # of outputs

HIERARCH ESO DET OUTREF = 0 / reference output

HIERARCH ESO DET RA = 0.000000000 / Apparent 00:00:00.0 RA at start

HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u

HIERARCH ESO DET READ MODE = 'normal ' / Readout method

HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin

HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed

HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi

HIERARCH ESO DET SHUT TMCLOS = 0.804 / Time taken to close shutter

HIERARCH ESO DET SHUT TMOPEN = 0.804 / Time taken to open shutter

HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter

HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode

HIERARCH ESO DET TELE INT = 600.0 / Interval between two successive te

HIERARCH ESO DET TELE NO = 103 / # of sources active

HIERARCH ESO DET TLM1 END = 154.800 / Telemetry value at read completion

HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor

HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para

HIERARCH ESO DET TLM1 START = 154.800 / Telemetry value at read start

HIERARCH ESO DET TLM10 END = 0.000 / Telemetry value at read completion

HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor

HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para

HIERARCH ESO DET TLM10 START = 0.000 / Telemetry value at read start

HIERARCH ESO DET TLM2 END = 152.800 / Telemetry value at read completion

HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor

HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para

HIERARCH ESO DET TLM2 START = 152.800 / Telemetry value at read start

HIERARCH ESO DET TLM3 END = 152.700 / Telemetry value at read completion

HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor

HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para

HIERARCH ESO DET TLM3 START = 152.700 / Telemetry value at read start

HIERARCH ESO DET TLM4 END = 154.900 / Telemetry value at read completion

HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor

HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para

HIERARCH ESO DET TLM4 START = 154.900 / Telemetry value at read start

HIERARCH ESO DET TLM5 END = 147.200 / Telemetry value at read completion

HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor

HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para

HIERARCH ESO DET TLM5 START = 147.200 / Telemetry value at read start

HIERARCH ESO DET TLM6 END = 149.200 / Telemetry value at read completion

HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor

HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para

HIERARCH ESO DET TLM6 START = 149.200 / Telemetry value at read start

HIERARCH ESO DET TLM7 END = 149.200 / Telemetry value at read completion

HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor

HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para

HIERARCH ESO DET TLM7 START = 149.200 / Telemetry value at read start

HIERARCH ESO DET TLM8 END = 147.300 / Telemetry value at read completion

HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor

HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para

HIERARCH ESO DET TLM8 START = 147.300 / Telemetry value at read start

HIERARCH ESO DET TLM9 END = 273.100 / Telemetry value at read completion

HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor

HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para

HIERARCH ESO DET TLM9 START = 273.100 / Telemetry value at read start

HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X

HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y

HIERARCH ESO DET WIN1 DIT1 = 45.000000 / actual subintegration time

HIERARCH ESO DET WIN1 DKTM = 45.7253 / Dark current time

HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations

HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X

HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y

HIERARCH ESO DET WIN1 ST = T / If T, window enabled

HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X

HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y

HIERARCH ESO DET WIN1 UIT1 = 45.000000 / user defined subintegration time

HIERARCH ESO DET WINDOWS = 1 / # of windows readout

HIERARCH ESO DPR CATG = 'SCIENCE ' / Observation category

HIERARCH ESO DPR TECH = 'IMAGE,OFFSET' / Observation technique

HIERARCH ESO DPR TYPE = 'OBJECT ' / Observation type

HIERARCH ESO INS DATE = '2002-01-31' / Instrument release date (yyyy-mm-d

HIERARCH ESO INS DID = 'ESO-VLT-DIC.OMEGACAM_ICS-0.13' / Data dictionary

HIERARCH ESO INS FILT1 ID = 'PS3 ' / Filter unique id.

HIERARCH ESO INS FILT1 NAME = 'i_SDSS ' / Filter name.

HIERARCH ESO INS FILT1 NO = 9 / Pos 1-6=Mag.A 7-12=Mag.B 0=NO Filt

HIERARCH ESO INS FILT1 SWSIM = F / If T, function is software simulat

HIERARCH ESO INS ID = 'OMEGACAM/1.60' / Instrument ID.

HIERARCH ESO INS MODE = 'IMAGING ' / Instrument mode used.

HIERARCH ESO INS SENS1 ID = 'LCUR ' / sensor ID.

HIERARCH ESO INS SENS1 NAME = 'Lamps current' / sensor common name.

HIERARCH ESO INS SENS1 VAL = 0.000 / [A] Calibration Lamps Current

HIERARCH ESO INS SENS2 ID = 'FCFLI ' / sensor ID.

HIERARCH ESO INS SENS2 NAME = 'Flow Cooling Fluid IN of Ins' / sensor common na

HIERARCH ESO INS SENS2 VAL = 6.35 / [l/min] Instr Cool. Fluid Flow IN

HIERARCH ESO INS SENS3 ID = 'FCFLD ' / sensor ID.

HIERARCH ESO INS SENS3 NAME = 'Diff flow Cooling Fluid of Ins' / sensor common

HIERARCH ESO INS SENS3 VAL = 0.03 / [l/min] Instr Cool. Fluid Flow DIF

HIERARCH ESO INS SHUT1 SWSIM = F / If T, function is software simulat

HIERARCH ESO INS SWSIM = 'NORMAL ' / Software simulation.

HIERARCH ESO INS TEMP11 ID = 'TFS ' / Temperature sensor ID.

HIERARCH ESO INS TEMP11 NAME = 'Temp. Filter System' / Temperature sensor name.

HIERARCH ESO INS TEMP11 VAL = 11.3 / [DEG C] Filter system temperature

HIERARCH ESO INS TEMP12 ID = 'TFCL1 ' / Temperature sensor ID.

HIERARCH ESO INS TEMP12 NAME = 'Temp. FIERA Cooling Liquid IN' / Temperature sen

HIERARCH ESO INS TEMP12 VAL = 4.0 / [DEG C] FIERA Cooling Liquid IN T

HIERARCH ESO INS TEMP13 ID = 'TFCL2 ' / Temperature sensor ID.

HIERARCH ESO INS TEMP13 NAME = 'Temp. FIERA Cooling Liquid OUT' / Temperature se

HIERARCH ESO INS TEMP13 VAL = 7.6 / [DEG C] FIERA Cooling Liquid OUT T

HIERARCH ESO OBS AIRM = 1.4 / Requested maximum airmass

HIERARCH ESO OBS AMBI FWHM = 1.4 / Requested maximum seeing

HIERARCH ESO OBS AMBI TRANS = '2CLR ' / Requested sky transparency

HIERARCH ESO OBS CONTAINER ID= 595675 / Scheduling container ID

HIERARCH ESO OBS CONTAINER TYPE= 'G ' / Scheduling container type

HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-1.11' / OBS Dictionary

HIERARCH ESO OBS EXECTIME = 3085 / Expected execution time

HIERARCH ESO OBS GRP = '0 ' / linked blocks

HIERARCH ESO OBS ID = 595676 / Observation block ID

HIERARCH ESO OBS MOON DIST = 30 / Requested minimum angular distance

HIERARCH ESO OBS MOON FLI = 0.8 / Requested maximum fractional lunar

HIERARCH ESO OBS NAME = 'iband--26_vst__1_15_1' / OB name

HIERARCH ESO OBS OBSERVER = 'UNKNOWN ' / Observer Name

HIERARCH ESO OBS PI-COI ID = 445 / ESO internal PI-COI ID

HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN ' / PI-COI name

HIERARCH ESO OBS PROG ID = '177.A-3011(B)' / ESO program identification

HIERARCH ESO OBS START = '2011-10-04T00:15:14' / OB start time

HIERARCH ESO OBS STREHLRATIO = 0.0 / Requested strehl ratio

HIERARCH ESO OBS STRTG = 'Mosaic ' / Observing strategy

HIERARCH ESO OBS TARG NAME = 'ATLAS survey' / OB target name

HIERARCH ESO OBS TPLNO = 2 / Template number within OB

HIERARCH ESO OBS TWILIGHT = 0 / Requested twilight

HIERARCH ESO OBS WATERVAPOUR = 0.0 / Requested water vapour

HIERARCH ESO OCS DET1 IMGNAME= 'OMEGACAM_IMG_OBS' / Data File Name.

HIERARCH ESO TEL ADC ST = F / ADC state, if T ADC is in path.

HIERARCH ESO TEL AIRM END = 1.043 / Airmass at end

HIERARCH ESO TEL AIRM START = 1.044 / Airmass at start

HIERARCH ESO TEL ALT = 73.215 / Alt angle at start (deg)

HIERARCH ESO TEL AMBI FWHM END= 0.93 / Seeing queried from ASM (arcsec)

HIERARCH ESO TEL AMBI FWHM START= 0.89 / Seeing queried from ASM (arcsec)

HIERARCH ESO TEL AMBI PRES END= 744.58 / Air pressure from ASM (hPa)

HIERARCH ESO TEL AMBI PRES START= 744.58 / Air pressure from ASM (hPa)

HIERARCH ESO TEL AMBI RHUM = 3. / Relative humidity from ASM

HIERARCH ESO TEL AMBI TAU0 = 0.001647 / Average coherence time (s)

HIERARCH ESO TEL AMBI TEMP = 9.74 / Amb temp from ASM (deg C)

HIERARCH ESO TEL AMBI WINDDIR= 330. / Wind direction (N=0 E=90) (deg)

HIERARCH ESO TEL AMBI WINDSP = 9.46 / Wind speed from ASM (m/s)

HIERARCH ESO TEL AZ = 277.072 / Az angle at start (deg) S=0,W=90

HIERARCH ESO TEL CHOP ST = F / True when chopping is active

HIERARCH ESO TEL DATE = '2011-05-10T24:00:00.0' / TCS installation date

HIERARCH ESO TEL DID = 'ESO-VLT-DIC.TCS' / Data dictionary for TEL

HIERARCH ESO TEL DOME STATUS = 'FULLY-OPEN' / Dome status

HIERARCH ESO TEL FOCU ID = 'CA ' / Telescope focus station ID

HIERARCH ESO TEL FOCU LEN = 14.497 / Focal length (m)

HIERARCH ESO TEL FOCU SCALE = 14.267 / Focal scale (arcsec/mm)

HIERARCH ESO TEL FOCU VALUE = 0.729 / M2 setting (mm)

HIERARCH ESO TEL GEOELEV = 2648. / Elevation above sea level (m)

HIERARCH ESO TEL GEOLAT = -24.6251 / Tel geo latitute (+=North) (deg)

HIERARCH ESO TEL GEOLON = -70.4027 / Tel geo longitude (+=East) (deg)

HIERARCH ESO TEL ID = 'v 0.162 ' / TCS version number

HIERARCH ESO TEL MOON DEC = -21.06901 / -21:04:08.4 DEC (J2000) (deg)

HIERARCH ESO TEL MOON RA = 279.339939 / 18:37:21.5 RA (J2000) (deg)

HIERARCH ESO TEL OPER = 'I, Respiri' / Telescope Operator

HIERARCH ESO TEL PARANG END = -90.743 / Parallactic angle at end (deg)

HIERARCH ESO TEL PARANG START= -90.837 / Parallactic angle at start (deg)

HIERARCH ESO TEL TARG ALPHA = 212712.624 / Alpha coordinate for the target

HIERARCH ESO TEL TARG COORDTYPE= 'M ' / Coordinate type (M=mean A=apparent

HIERARCH ESO TEL TARG DELTA = -253600.360 / Delta coordinate for the target

HIERARCH ESO TEL TARG EPOCH = 2000.000 / Epoch

HIERARCH ESO TEL TARG EPOCHSYSTEM= 'J ' / Epoch system (default J=Julian)

HIERARCH ESO TEL TARG EQUINOX= 2000.000 / Equinox

HIERARCH ESO TEL TARG PARALLAX= 0.000 / Parallax

HIERARCH ESO TEL TARG PMA = 0.000000 / Proper Motion Alpha

HIERARCH ESO TEL TARG PMD = 0.000000 / Proper motion Delta

HIERARCH ESO TEL TARG RADVEL = 0.000 / Radial velocity

HIERARCH ESO TEL TH M1 TEMP = 9.88 / M1 superficial temperature (deg C)

HIERARCH ESO TEL TRAK STATUS = 'NORMAL ' / Tracking status

HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL

HIERARCH ESO TPL EXPNO = 20 / Exposure number within template

HIERARCH ESO TPL ID = 'OMEGACAM_img_obs_offset' / Template signature ID

HIERARCH ESO TPL NAME = 'OMEGACAM offset mode sequence' / Template name

HIERARCH ESO TPL NEXP = 34 / Number of exposures within templat

HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_obs_offset.seq' / Sequencer script

HIERARCH ESO TPL START = '2011-10-04T00:20:33' / TPL start time

HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template

ORIGFILE= 'OMEGACAM_IMG_OBS277_0020.fits' / Original File Name

ARCFILE = 'OMEGA.2011-10-04T00:49:35.966.fits' / Archive File Name

CHECKSUM= 'IASIL1RHI8RHI8RH' / HDU checksum updated 2011-10-04T00:51:09

DATASUM = ' 0' / data unit checksum updated 2011-10-04T00:51:09

PREVIEWV= '$Id: preview,v 1.8 2011/11/16 09:51:09 jrl Exp $' / Version of previe

SOFTVERS= '$Revision: 1.182 $' / CIRDR Version

SOFTDATE= '$Date: 2012-03-11 19:17:00 $' / CIRDR release date

SOFTAUTH= 'Jim Lewis <jrl@ast.cam.ac.uk>' / Contact for bug reports

SOFTINST= 'CASU: http://casu.ast.cam.ac.uk' / CASU URL

CASUVERS= 'omegacam version 1.0' / CASU Release Version Number

OBSTATUS= ' ' / ESO OB status

ESOGRADE= ' ' / ESO grade

OSA_TIME= ' ' / OSA time stamp

OSA_MFID= 0 / OSA Multiframe ID

HDU 1

XTENSION= 'IMAGE ' / binary table extension

BITPIX = 32 / data type of original image

NAXIS = 2 / dimension of original image

NAXIS1 = 2048 / length of original image axis

NAXIS2 = 4100 / length of original image axis

PCOUNT = 0 / size of special data area

GCOUNT = 1 / one data group (required keyword)

EXTNAME = 'ESO_CCD_#65' / Extension name

ORIGIN = 'ESO-PARANAL' / European Southern Observatory

DATE = '2011-10-04T00:50:23.357' / UT date when this file was written

CTYPE1 = 'RA---TAN' / Pixel coordinate system

CTYPE2 = 'DEC--TAN' / Pixel coordinate system

CRPIX1 = 8546.54110265624 / Ref. pixel of center of rotation

CRPIX2 = 8569.51527358597 / Ref. pixel of center of rotation

CRVAL1 = 332.672396672779 / [deg] 22:10:41.2 Value of ref pixel

CRVAL2 = -25.607858082265 / [deg] -25:36:25.9 Value of ref pixel

CD1_1 = 5.92108620213408E-05 / WCS transform matrix element

CD2_1 = 3.85794529183103E-09 / WCS transform matrix element

CD1_2 = -1.04064013967133E-08 / WCS transform matrix element

CD2_2 = 5.92206144778355E-05 / WCS transform matrix element

HIERARCH ESO DET CHIP DATE = '2004-06-01' / Date of installation [YYYY-MM-DD]

HIERARCH ESO DET CHIP ID = 'ESO_CCD_#65' / Detector chip identification

HIERARCH ESO DET CHIP INDEX = 1 / Chip index

HIERARCH ESO DET CHIP NAME = 'e2vCCD44-82' / Detector chip name

HIERARCH ESO DET CHIP NX = 2048 / # of pixels along X

HIERARCH ESO DET CHIP NY = 4100 / # of pixels along Y

HIERARCH ESO DET CHIP PSZX = 15.0 / Size of pixel in X

HIERARCH ESO DET CHIP PSZY = 15.0 / Size of pixel in Y

HIERARCH ESO DET CHIP X = 1 / X location in array

HIERARCH ESO DET CHIP XGAP = 1500.000000 / Gap between chips along x

HIERARCH ESO DET CHIP Y = 1 / Y location in array

HIERARCH ESO DET CHIP YGAP = 5640.000000 / Gap between chips along y

HIERARCH ESO DET OUT1 CHIP = 1 / Chip to which the output belongs

HIERARCH ESO DET OUT1 CONAD = 2.08 / Conversion from ADUs to electrons

HIERARCH ESO DET OUT1 GAIN = 0.48 / Conversion from electrons to ADU

HIERARCH ESO DET OUT1 ID = 'L ' / Output ID as from manufacturer

HIERARCH ESO DET OUT1 INDEX = 1 / Output index

HIERARCH ESO DET OUT1 NAME = 'L ' / Description of output

HIERARCH ESO DET OUT1 NX = 2048 / valid pixels along X

HIERARCH ESO DET OUT1 NY = 4100 / valid pixels along Y

HIERARCH ESO DET OUT1 OVSCX = 48 / Overscan region in X

HIERARCH ESO DET OUT1 OVSCY = 100 / Overscan region in Y

HIERARCH ESO DET OUT1 PRSCX = 48 / Prescan region in X

HIERARCH ESO DET OUT1 PRSCY = 0 / Prescan region in Y

HIERARCH ESO DET OUT1 RON = 0.00 / Readout noise per output (e-)

HIERARCH ESO DET OUT1 X = 1 / X location of output

HIERARCH ESO DET OUT1 Y = 1 / Y location of output

INHERIT = T / denotes the INHERIT keyword convention

BIASCOR = T / Bias correction done

BIASSRC = 'bias_20111003.fit[1]' / Bias frame used

OVERSCAN= T / Overscan correction done

FLATCOR = T / Flat correction done

FLATSRC = 'i_SDSS_flat_20111003.fit[1]' / Flat frame used

GAINCOR = 0.9496661 / Gain correction factor

CIR_CPM = 'i_SDSS_conf_20111003.fit[1]' / Confidence map

HISTORY 20111122 14:56:44

HISTORY $Id: cir_defringe.c,v 1.14 2011/11/18 13:21:03 jim Exp $

CIR_VERS= '$Revision: 1.182 $' / CIRDR Version

DEFRINGE= 'Done with i_SDSS_fringe_20111003_24.fit[1]: scaled by 0.871035'

SKYLEVEL= 115.23 / Sky level estimate from IMCORE

SKYNOISE= 7.19 / Sky noise estimate from IMCORE

HISTORY 20111122 17:52:18

HISTORY $Id: cir_imcore.c,v 1.12 2006/07/31 13:21:08 jim Exp $

SEEING = 2.935052 / Seeing estimate from CLASSIFY

ELLIPTIC= 0.06063956 / Ellipticity estimate from IMCORE

HISTORY 20111122 18:02:06

HISTORY $Id: cir_platesol.c,v 1.15 2011/05/31 09:20:51 jim Exp $

NUMBRMS = 29 / Number of stars used in fit

STDCRMS = 0.161127969622612 / RMS of standard coordinates

WCSPASS = 2

NUMSTDS = 36 / Number of standards available

RAZP02 = 1.551853 / [arcsec] Ref RA shift pass 0 to 2 (new - old)

DECZP02 = -2.269228 / [arcsec] Ref Dec shift pass 0 to 2 (new - old)

BSCALE = 1.

MAGZPT = 23.802 / Photometric ZP (mags) for default extinction

MAGZRR = 0.022 / Photometric ZP error (mags)

EXTINCT = 0.05 / Extinction coefficient (mags)

CHECKSUM= 'VVejVVdhVVdhVVdh' / HDU checksum updated 2011-10-04T00:51:09

DATASUM = '2640996558' / data unit checksum updated 2011-10-04T00:51:09

HISTORY 20120322 15:08:14

HISTORY $Id: cir_imcore.c,v 1.12 2006-07-31 13:21:08 jim Exp $