SIMPLE = T / Standard FITS format (NOST-100.0)
BITPIX = 16 / # of bits storing pix values
NAXIS = 0 / # of axes in frame
EXTEND = T / Extension may be present
ORIGIN = 'ESO-PARANAL' / European Southern Observatory
DATE = '2016-04-04T04:14:08.331' / UT date when this file was written
TELESCOP= 'ESO-VST ' / ESO Telescope Name
INSTRUME= 'OMEGACAM' / Instrument used.
OBJECT = 'STD,ZEROPOINT' / Original target.
RA = 190.550000 / 12:42:12.0 RA (J2000) pointing (deg)
DEC = -0.50444 / -00:30:15.9 DEC (J2000) pointing (deg)
EQUINOX = 2000. / Standard FK5 (years)
RADECSYS= 'FK5 ' / Coordinate reference frame
EXPTIME = 300.0000 / Total integration time
MJD-OBS = 57482.172987704 / MJD start (2016-04-04T04:09:06.138)
DATE-OBS= '2016-04-04T04:09:06.137' / Date of observation
UTC = 14938.000 / 04:08:58.000 UTC at start (sec)
LST = 44339.999 / 12:18:59.999 LST at start (sec)
PI-COI = 'UNKNOWN ' / PI-COI name.
OBSERVER= 'UNKNOWN ' / Name of observer.
HIERARCH ESO ADA ABSROT END = 10.42176 / Abs rot angle at exp end (deg)
HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position
HIERARCH ESO ADA ABSROT START= 13.17013 / Abs rot angle at exp start (deg)
HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider
HIERARCH ESO ADA POSANG = 0.00000 / Position angle at start
HIERARCH ESO DET BITS = 16 / Bits per pixel readout
HIERARCH ESO DET CHIPS = 32 / # of chips in detector array
HIERARCH ESO DET DATE = '2004-11-10' / Installation date
HIERARCH ESO DET DEC = 0.000000000 / Apparent 00:00:00.0 DEC at start
HIERARCH ESO DET DID = 'ESO-VLT-DIC.OMEGA_CCD,ESO-VLT-DIC.FCDDCS' / Dict
HIERARCH ESO DET EXP NO = 761 / Unique exposure ID number
HIERARCH ESO DET EXP RDTTIME = 30.597 / image readout time
HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type
HIERARCH ESO DET EXP XFERTIM = 30.529 / image transfer time
HIERARCH ESO DET FRAM ID = 1 / Image sequencial number
HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type
HIERARCH ESO DET ID = 'CCD FIERA - Rev: 238334' / Detector system Id
HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system
HIERARCH ESO DET OUTPUTS = 32 / # of outputs
HIERARCH ESO DET OUTREF = 0 / reference output
HIERARCH ESO DET RA = 0.000000000 / Apparent 00:00:00.0 RA at start
HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u
HIERARCH ESO DET READ MODE = 'normal ' / Readout method
HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin
HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed
HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE132' / Shutter unique identifi
HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter
HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter
HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter
HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode
HIERARCH ESO DET TELE INT = 600.0 / Interval between two successive te
HIERARCH ESO DET TELE NO = 22 / # of sources active
HIERARCH ESO DET TLM1 END = 147.000 / Telemetry value at read completion
HIERARCH ESO DET TLM1 ID = 'SE132 ' / ID of telemetry sensor
HIERARCH ESO DET TLM1 NAME = 'Mosaicplate out' / Description of telemetry para
HIERARCH ESO DET TLM1 START = 147.000 / Telemetry value at read start
HIERARCH ESO DET TLM10 END = 287.000 / Telemetry value at read completion
HIERARCH ESO DET TLM10 ID = 'SE20 ' / ID of telemetry sensor
HIERARCH ESO DET TLM10 NAME = 'Bottom Heat Exc' / Description of telemetry para
HIERARCH ESO DET TLM10 START = 287.000 / Telemetry value at read start
HIERARCH ESO DET TLM2 END = 5.800E-05 / Telemetry value at read completion
HIERARCH ESO DET TLM2 ID = 'SE8 ' / ID of telemetry sensor
HIERARCH ESO DET TLM2 NAME = 'Cryostat Vacuum' / Description of telemetry para
HIERARCH ESO DET TLM2 START = 5.800E-05 / Telemetry value at read start
HIERARCH ESO DET TLM3 END = 287.300 / Telemetry value at read completion
HIERARCH ESO DET TLM3 ID = 'SE10 ' / ID of telemetry sensor
HIERARCH ESO DET TLM3 NAME = 'Fiera 1 ps' / Description of telemetry param.
HIERARCH ESO DET TLM3 START = 287.300 / Telemetry value at read start
HIERARCH ESO DET TLM4 END = 288.500 / Telemetry value at read completion
HIERARCH ESO DET TLM4 ID = 'SE11 ' / ID of telemetry sensor
HIERARCH ESO DET TLM4 NAME = 'Fiera 1 dfe' / Description of telemetry param.
HIERARCH ESO DET TLM4 START = 288.500 / Telemetry value at read start
HIERARCH ESO DET TLM5 END = 286.200 / Telemetry value at read completion
HIERARCH ESO DET TLM5 ID = 'SE12 ' / ID of telemetry sensor
HIERARCH ESO DET TLM5 NAME = 'Fiera 2 ps' / Description of telemetry param.
HIERARCH ESO DET TLM5 START = 286.200 / Telemetry value at read start
HIERARCH ESO DET TLM6 END = 288.900 / Telemetry value at read completion
HIERARCH ESO DET TLM6 ID = 'SE13 ' / ID of telemetry sensor
HIERARCH ESO DET TLM6 NAME = 'Fiera 2 dfe' / Description of telemetry param.
HIERARCH ESO DET TLM6 START = 288.900 / Telemetry value at read start
HIERARCH ESO DET TLM7 END = 287.400 / Telemetry value at read completion
HIERARCH ESO DET TLM7 ID = 'SE14 ' / ID of telemetry sensor
HIERARCH ESO DET TLM7 NAME = 'Fiera 3 ps' / Description of telemetry param.
HIERARCH ESO DET TLM7 START = 287.400 / Telemetry value at read start
HIERARCH ESO DET TLM8 END = 289.400 / Telemetry value at read completion
HIERARCH ESO DET TLM8 ID = 'SE15 ' / ID of telemetry sensor
HIERARCH ESO DET TLM8 NAME = 'Fiera 3 dfe' / Description of telemetry param.
HIERARCH ESO DET TLM8 START = 289.400 / Telemetry value at read start
HIERARCH ESO DET TLM9 END = 113.800 / Telemetry value at read completion
HIERARCH ESO DET TLM9 ID = 'SE19 ' / ID of telemetry sensor
HIERARCH ESO DET TLM9 NAME = 'Top Heat Exchan' / Description of telemetry para
HIERARCH ESO DET TLM9 START = 113.800 / Telemetry value at read start
HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X
HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y
HIERARCH ESO DET WIN1 DIT1 = 300.000000 / actual subintegration time
HIERARCH ESO DET WIN1 DKTM = 300.3159 / Dark current time
HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations
HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X
HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y
HIERARCH ESO DET WIN1 ST = T / If T, window enabled
HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X
HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y
HIERARCH ESO DET WIN1 UIT1 = 300.000000 / user defined subintegration time
HIERARCH ESO DET WINDOWS = 1 / # of windows readout
HIERARCH ESO DPR CATG = 'CALIB ' / Observation category
HIERARCH ESO DPR TECH = 'IMAGE,DIRECT' / Observation technique
HIERARCH ESO DPR TYPE = 'STD,ZEROPOINT' / Observation type
HIERARCH ESO INS DATE = '2002-01-31' / Instrument release date (yyyy-mm-d
HIERARCH ESO INS DID = 'ESO-VLT-DIC.OMEGACAM_ICS-217958' / Data dictiona
HIERARCH ESO INS FILT1 ID = 'PS7 ' / Filter unique id.
HIERARCH ESO INS FILT1 NAME = 'u_SDSS ' / Filter name.
HIERARCH ESO INS FILT1 NO = 1 / Pos 1-6=Mag.A 7-12=Mag.B 0=NO Filt
HIERARCH ESO INS FILT1 SWSIM = F / If T, function is software simulat
HIERARCH ESO INS ID = 'OMEGACAM/176642' / Instrument ID.
HIERARCH ESO INS MODE = 'IMAGING ' / Instrument mode used.
HIERARCH ESO INS SENS1 ID = 'LCUR ' / sensor ID.
HIERARCH ESO INS SENS1 NAME = 'Lamps current' / sensor common name.
HIERARCH ESO INS SENS1 VAL = 0.010 / [A] Calibration Lamps Current
HIERARCH ESO INS SENS2 ID = 'FCFLI ' / sensor ID.
HIERARCH ESO INS SENS2 NAME = 'Flow Cooling Fluid IN of Ins' / sensor common na
HIERARCH ESO INS SENS2 VAL = 4.35 / [l/min] Instr Cool. Fluid Flow IN
HIERARCH ESO INS SENS3 ID = 'FCFLD ' / sensor ID.
HIERARCH ESO INS SENS3 NAME = 'Diff flow Cooling Fluid of Ins' / sensor common
HIERARCH ESO INS SENS3 VAL = -0.32 / [l/min] Instr Cool. Fluid Flow DIF
HIERARCH ESO INS SHUT1 SWSIM = F / If T, function is software simulat
HIERARCH ESO INS SWSIM = 'NORMAL ' / Software simulation.
HIERARCH ESO INS TEMP11 ID = 'TFS ' / Temperature sensor ID.
HIERARCH ESO INS TEMP11 NAME = 'Temp. Filter System' / Temperature sensor name.
HIERARCH ESO INS TEMP11 VAL = 16.9 / [DEG C] Filter system temperature
HIERARCH ESO INS TEMP12 ID = 'TFCL1 ' / Temperature sensor ID.
HIERARCH ESO INS TEMP12 NAME = 'Temp. FIERA Cooling Liquid IN' / Temperature sen
HIERARCH ESO INS TEMP12 VAL = 9.1 / [DEG C] FIERA Cooling Liquid IN T
HIERARCH ESO INS TEMP13 ID = 'TFCL2 ' / Temperature sensor ID.
HIERARCH ESO INS TEMP13 NAME = 'Temp. FIERA Cooling Liquid OUT' / Temperature se
HIERARCH ESO INS TEMP13 VAL = 13.6 / [DEG C] FIERA Cooling Liquid OUT T
HIERARCH ESO OBS AIRM = 2.8 / Req. max. airmass
HIERARCH ESO OBS AMBI FWHM = 2.0 / Req. max. seeing
HIERARCH ESO OBS AMBI TRANS = '1PHO ' / Req. sky transparency
HIERARCH ESO OBS ATM = 'NATM ' / Req. Atmospheric Turbulence Model
HIERARCH ESO OBS CONTAINER ID= -999 / Scheduling container ID
HIERARCH ESO OBS CONTAINER TYPE= 'U ' / Scheduling container type
HIERARCH ESO OBS CONTRAST = 0.0 / Req. contrast
HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-2.0' / OBS Dictionary
HIERARCH ESO OBS EXECTIME = 1385 / Expected execution time
HIERARCH ESO OBS GRP = '0 ' / linked blocks
HIERARCH ESO OBS ID = 200244004 / Observation block ID
HIERARCH ESO OBS MOON DIST = 30 / Req. min. angular dist. from moon
HIERARCH ESO OBS MOON FLI = 1.0 / Req. max. fractional lunar illum.
HIERARCH ESO OBS NAME = 'OMEGACAM_Landolt_SA104_Master_Key' / OB name
HIERARCH ESO OBS NTPL = 6 / Number of templates within OB
HIERARCH ESO OBS OBSERVER = 'UNKNOWN ' / Observer Name
HIERARCH ESO OBS PI-COI ID = 52038 / ESO internal PI-COI ID
HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN ' / PI-COI name
HIERARCH ESO OBS PROG ID = '60.A-9038(A)' / ESO program identification
HIERARCH ESO OBS START = '2016-04-04T04:02:46' / OB start time
HIERARCH ESO OBS STREHLRATIO = 0.0 / Req. strehl ratio
HIERARCH ESO OBS STRTG = 'Freq ' / Observing strategy
HIERARCH ESO OBS TARG NAME = 'SA104 ' / OB target name
HIERARCH ESO OBS TPLNO = 2 / Template number within OB
HIERARCH ESO OBS TWILIGHT = 0 / Req. twilight
HIERARCH ESO OBS WATERVAPOUR = 0.0 / Req. water vapour
HIERARCH ESO OCS DET1 IMGNAME= 'OMEGACAM_IMG_STD' / Data File Name.
HIERARCH ESO TEL ADC ST = F / ADC state, if T ADC is in path.
HIERARCH ESO TEL AIRM END = 1.098 / Airmass at end
HIERARCH ESO TEL AIRM START = 1.101 / Airmass at start
HIERARCH ESO TEL ALT = 65.279 / Alt angle at start (deg)
HIERARCH ESO TEL AMBI FWHM END= 0.48 / Seeing queried from ASM (arcsec)
HIERARCH ESO TEL AMBI FWHM START= 0.50 / Seeing queried from ASM (arcsec)
HIERARCH ESO TEL AMBI PRES END= 746.28 / Air pressure from ASM (hPa)
HIERARCH ESO TEL AMBI PRES START= 746.23 / Air pressure from ASM (hPa)
HIERARCH ESO TEL AMBI RHUM = 21. / Relative humidity from ASM
HIERARCH ESO TEL AMBI TAU0 = 0.005606 / Average coherence time (s)
HIERARCH ESO TEL AMBI TEMP = 13.60 / Amb temp from ASM (deg C)
HIERARCH ESO TEL AMBI WINDDIR= 2. / Wind direction (N=0 E=90) (deg)
HIERARCH ESO TEL AMBI WINDSP = 7.85 / Wind speed from ASM (m/s)
HIERARCH ESO TEL AZ = 194.521 / Az angle at start (deg) S=0,W=90
HIERARCH ESO TEL CHOP ST = F / True when chopping is active
HIERARCH ESO TEL DATE = '2011-05-10T24:00:00.0' / TCS installation date
HIERARCH ESO TEL DID = 'ESO-VLT-DIC.TCS' / Data dictionary for TEL
HIERARCH ESO TEL DOME STATUS = 'FULLY-OPEN' / Dome status
HIERARCH ESO TEL FOCU ID = 'CA ' / Telescope focus station ID
HIERARCH ESO TEL FOCU LEN = 14.497 / Focal length (m)
HIERARCH ESO TEL FOCU SCALE = 14.267 / Focal scale (arcsec/mm)
HIERARCH ESO TEL FOCU VALUE = 0.370 / M2 setting (mm)
HIERARCH ESO TEL GEOELEV = 2648. / Elevation above sea level (m)
HIERARCH ESO TEL GEOLAT = -24.6251 / Tel geo latitute (+=North) (deg)
HIERARCH ESO TEL GEOLON = -70.4027 / Tel geo longitude (+=East) (deg)
HIERARCH ESO TEL ID = 'v 262934' / TCS version number
HIERARCH ESO TEL MOON DEC = -9.38376 / -09:23:01.5 DEC (J2000) (deg)
HIERARCH ESO TEL MOON RA = 330.941227 / 22:03:45.8 RA (J2000) (deg)
HIERARCH ESO TEL OPER = 'I, Respiri' / Telescope Operator
HIERARCH ESO TEL PARANG END = -169.569 / Parallactic angle at end (deg)
HIERARCH ESO TEL PARANG START= -166.830 / Parallactic angle at start (deg)
HIERARCH ESO TEL TARG ALPHA = 124212.000 / Alpha coordinate for the target
HIERARCH ESO TEL TARG COORDTYPE= 'M ' / Coordinate type (M=mean A=apparent
HIERARCH ESO TEL TARG DELTA = -3016.000 / Delta coordinate for the target
HIERARCH ESO TEL TARG EPOCH = 2000.000 / Epoch
HIERARCH ESO TEL TARG EPOCHSYSTEM= 'J ' / Epoch system (default J=Julian)
HIERARCH ESO TEL TARG EQUINOX= 2000.000 / Equinox
HIERARCH ESO TEL TARG PARALLAX= 0.000 / Parallax
HIERARCH ESO TEL TARG PMA = 0.000000 / Proper Motion Alpha
HIERARCH ESO TEL TARG PMD = 0.000000 / Proper motion Delta
HIERARCH ESO TEL TARG RADVEL = 0.000 / Radial velocity
HIERARCH ESO TEL TH M1 TEMP = 13.89 / M1 superficial temperature (deg C)
HIERARCH ESO TEL TRAK STATUS = 'NORMAL ' / Tracking status
HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL
HIERARCH ESO TPL EXPNO = 1 / Exposure number within template
HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_zp' / Template signature ID
HIERARCH ESO TPL NAME = 'OMEGACAM ZP calib' / Template name
HIERARCH ESO TPL NEXP = 1 / Number of exposures within templat
HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_obs_stare.seq' / Sequencer script
HIERARCH ESO TPL START = '2016-04-04T04:08:55' / TPL start time
HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template
ORIGFILE= 'OMEGACAM_IMG_STD095_0001.fits' / Original File Name
ARCFILE = 'OMEGA.2016-04-04T04:09:06.137.fits' / Archive File Name
CHECKSUM= 'GSWWJSVVGSVVGSVV' / HDU checksum updated 2016-04-04T04:14:49
DATASUM = ' 0' / data unit checksum updated 2016-04-04T04:14:49
PREVIEWV= '$Id: preview,v 1.14 2012/12/05 10:14:23 jim Exp $' / Version of previ
SOFTVERS= '$Revision: 1.205 $' / CIRDR Version
SOFTDATE= '$Date: 2016/01/05 11:05:23 $' / CIRDR release date
SOFTAUTH= 'Jim Lewis <jrl@ast.cam.ac.uk>' / Contact for bug reports
SOFTINST= 'CASU: http://casu.ast.cam.ac.uk' / CASU URL
CASUVERS= 'omegacam version 1.0' / CASU Release Version Number
OSA_TIME= ' ' / OSA time stamp
OSA_MFID= 0 / OSA Multiframe ID
XTENSION= 'IMAGE ' / binary table extension
BITPIX = 32 / data type of original image
NAXIS = 2 / dimension of original image
NAXIS1 = 2048 / length of original image axis
NAXIS2 = 4100 / length of original image axis
PCOUNT = 0 / size of special data area
GCOUNT = 1 / one data group (required keyword)
EXTNAME = 'ESO_CCD_#65' / Extension name
ORIGIN = 'ESO-PARANAL' / European Southern Observatory
DATE = '2016-04-04T04:14:08.331' / UT date when this file was written
CTYPE1 = 'RA---TAN' / Pixel coordinate system
CTYPE2 = 'DEC--TAN' / Pixel coordinate system
CRPIX1 = 8541.80998182333 / Ref. pixel of center of rotation
CRPIX2 = 8552.48369392451 / Ref. pixel of center of rotation
CRVAL1 = 190.552888408404 / [deg] [deg] 12:42:11.9 Value of ref pixel
CRVAL2 = -0.502082988572538 / [deg] [deg] -00:30:16.0 Value of ref pixel
CD1_1 = 5.92812094261137E-05 / WCS transform matrix element
CD2_1 = 1.21734085188323E-07 / WCS transform matrix element
CD1_2 = -4.73188256921802E-08 / WCS transform matrix element
CD2_2 = 5.92446243051371E-05 / WCS transform matrix element
HIERARCH ESO DET CHIP DATE = '2004-06-01' / Date of installation [YYYY-MM-DD]
HIERARCH ESO DET CHIP ID = 'ESO_CCD_#65' / Detector chip identification
HIERARCH ESO DET CHIP INDEX = 1 / Chip index
HIERARCH ESO DET CHIP NAME = 'e2vCCD44-82' / Detector chip name
HIERARCH ESO DET CHIP NX = 2048 / # of pixels along X
HIERARCH ESO DET CHIP NY = 4100 / # of pixels along Y
HIERARCH ESO DET CHIP PSZX = 15.0 / Size of pixel in X
HIERARCH ESO DET CHIP PSZY = 15.0 / Size of pixel in Y
HIERARCH ESO DET CHIP X = 1 / X location in array
HIERARCH ESO DET CHIP XGAP = 1500.0 / Gap between chips along x
HIERARCH ESO DET CHIP Y = 1 / Y location in array
HIERARCH ESO DET CHIP YGAP = 5640.0 / Gap between chips along y
HIERARCH ESO DET OUT1 CHIP = 1 / Chip to which the output belongs
HIERARCH ESO DET OUT1 CONAD = 2.08 / Conversion from ADUs to electrons
HIERARCH ESO DET OUT1 GAIN = 0.48 / Conversion from electrons to ADU
HIERARCH ESO DET OUT1 ID = 'L ' / Output ID as from manufacturer
HIERARCH ESO DET OUT1 INDEX = 1 / Output index
HIERARCH ESO DET OUT1 NAME = 'L ' / Description of output
HIERARCH ESO DET OUT1 NX = 2048 / valid pixels along X
HIERARCH ESO DET OUT1 NY = 4100 / valid pixels along Y
HIERARCH ESO DET OUT1 OVSCX = 48 / Overscan region in X
HIERARCH ESO DET OUT1 OVSCY = 100 / Overscan region in Y
HIERARCH ESO DET OUT1 PRSCX = 48 / Prescan region in X
HIERARCH ESO DET OUT1 PRSCY = 0 / Prescan region in Y
HIERARCH ESO DET OUT1 RON = 0.00 / [e-] Readout noise per output (ele
HIERARCH ESO DET OUT1 X = 1 / X location of output
HIERARCH ESO DET OUT1 Y = 1 / Y location of output
INHERIT = T / denotes the INHERIT keyword convention
BIASCOR = T / Bias correction done
BIASSRC = 'bias_20160403.fit[1]' / Bias frame used
OVERSCAN= T / Overscan correction done
FLATCOR = T / Flat correction done
FLATSRC = 'u_SDSS_flat_apr2016.fit[1]' / Flat frame used
GAINCOR = 1.107696 / Gain correction factor
CIR_CPM = 'u_SDSS_conf_apr2016.fit[1]' / Confidence map
SKYLEVEL= 20.85 / Sky level estimate from IMCORE
SKYNOISE= 3.47 / Sky noise estimate from IMCORE
HISTORY 20160418 19:44:00
HISTORY $Id: cir_imcore.c,v 1.12 2006/07/31 13:21:08 jim Exp $
CIR_VERS= '$Revision: 1.205 $' / CIRDR Version
SEEING = 5.179676 / Seeing estimate from CLASSIFY
ELLIPTIC= 0.1894902 / Ellipticity estimate from IMCORE
HISTORY 20160418 19:45:40
HISTORY $Id: cir_platesol.c,v 1.15 2011/05/31 09:20:51 jim Exp $
NUMBRMS = 20 / Number of stars used in fit
STDCRMS = 0.183229207992554 / RMS of standard coordinates
WCSPASS = 2
NUMSTDS = 38 / Number of standards available
RAZP02 = 10.39961 / [arcsec] Ref RA shift pass 0 to 2 (new - old)
DECZP02 = 8.42202 / [arcsec] Ref Dec shift pass 0 to 2 (new - old)
BSCALE = 1.
MAGZPT = 21.83 / Photometric ZP (mags) for default extinction
MAGZRR = 0.084 / Photometric ZP error (mags)
EXTINCT = 0.46 / Extinction coefficient (mags)
CHECKSUM= 'IIGoIGFmIGFmIGFm' / HDU checksum updated 2016-04-04T04:14:49
DATASUM = '3474519968' / data unit checksum updated 2016-04-04T04:14:49